eSUN Filament 3D ePLA-Matte Rainbow 1.75mm 1kg

499,00 DH TTC

698.6 DH

ePLA-Matte is a cost-effective matte pla filament that is environmentally friendly and easy to print. Compared with ABS, matte pla has higher rigidity and PC-like strength and does not require a closed cavity.PLA matte filament has low shrinkage, no warping and no cracking quality, and suitable for large-

Attention : dernières pièces disponibles !

Commandez par Whatsapp

En savoir plus

Filament Properties Table
3D PRINTING FILAMENTePLA-Matte
Density(g/cm3)1.174
Heat Distortion Temp(℃,0.45MPa)51
Melt Flow Index(g/10min)2.1(190℃/2.16kg)
Tensile Strength(MPa)34.56
Elongation at Break(%)56.1
Flexural Strength(MPa)41.21
Flexural Modulus(MPa)1119.41
IZOD Impact Strength(kJ/㎡)33.15
Durability4/10
Printability9/10
Recommended printing parameters
Extruder Temperature(℃)190 – 230℃
Recommended temperature 215℃
Bed temperature(℃) 45 – 60°C
Fan Speed 100%
Printing Speed 40 – 100mm/s
Heated Bed Optional
Recommended Build SurfacesMasking paper, PVP solid glue, PEI

Description

Matte pla filament has no smell when printing, which is safe and environmentally friendly; And the reel is made by reusing injection molding of PETG, ABS, PLA production waste and other industrial waste, and the outer box is made of recyclable paper. Make 3D printing more sustainable with the environmental protection concept; The matte pla surface is delicate and does not show layer lines; the filament is not easy to break which made the printing is smooth for a long time without clogging. PLA matte filament can be used for early concept models and rapid prototyping. Low density, ePLA-Matte single-roll consumables are 21% more than other matte PLA product print models.

Sellingpoint

Environmental friendly
Cost-effective
High-speed printing
Easy to peel off the support

Excellent printability
Hard to break
Matte surface effect
Low density

30 autres produits dans la même catégorie :