> >eSUN Filament 3D PLA+ Fire Engine Red 1.75mm 1kg

eSUN Filament 3D PLA+ Fire Engine Red 1.75mm 1kg

219,00 DH TTC

306.6 DH

PLA+ is an environment-friendly material, which is easy to print and has smooth surface.PLA+ filament has good strength, rigidity, toughness balance, strong impact resistance;So pla plus is considered suitable for functional parts printing.eSUN pla+ is approved by FDA, safer to use;PLA pro can be used for modeling, rapid prototyping.

Attention : dernières pièces disponibles !

Commandez par Whatsapp

En savoir plus

Filament Properties Table
3D PRINTING FILAMENTPLA+
Density(g/cm3)1.23
Heat Distortion Temp(℃,0.45MPa)53
Melt Flow Index(g/10min)5（190℃/2.16kg）
Tensile Strength(MPa)63
Elongation at Break(%)20
Flexural Strength(MPa)74
Flexural Modulus(MPa)1973
IZOD Impact Strength(kJ/㎡)9
2/10
Durability4/10
Printability9/10

30 autres produits dans la même catégorie :